Loading..

Product was successfully added to your shopping cart.





No products in the cart.

Blackmagic Design ATEM Camera Converter

$595.00 $$595.00
Product Code: BMD-SWRCONV

Be the first to review this product

$595.00
Description

Details

Camera converters must be used in pairs or with a Studio Converter

 

Extend your SDI or HDMI camera for 28 miles!

Extend your broadcast SDI or consumer HDMI camera using low cost optical fiber! Imagine connecting to cameras at remote locations on racing tracks, live sporting venus or even massive golf courses! Now with ATEM Camera Converter you can have more cameras closer to the action for the most amazing shots in live production! ATEM Camera Converter not only converts your camera to optical fiber, but it also includes talkback, external microphone input, program return feed, tally and built in battery power source! Now you can place cameras in multiple locations miles away from your switcher while keeping full broadcast HD video quality! Only $595

 

Professional Multi-Camera Production

ATEM Camera Converter gives you everything you need for live production in a single converter. Connect your camera to the SDI or HDMI inputs to convert to optical fiber, and connect your switcher program feed to the optical fiber input to convert to SDI and HDMI for monitoring. The SDI and HDMI monitoring outputs can be switched between your camera input or optical fiber input! Professional local microphone inputs are included. ATEM Camera Converter also includes an internal battery for remote use when your cameras are located far away from power sources, as well as built in talkback and tally!

 

Optical Fiber Link

Optical fiber is the perfect connection because it’s used in computer networking and is common, affordable and easy to purchase! ATEM Camera Converter uses a single mode optical fiber pair with LC type connectors, so you get the freedom to connect your cameras up to 147,000 feet or 45KM from your switcher!

 

Includes Talkback

In live production it’s critical for your camera operators to talk to the switcher operator so you can work as a team! ATEM Camera Converter includes talkback using low cost PC headsets or iPhone-compatible headphones, so each camera can communicate with the director at the switcher

 

Broadcast & Consumer Connections

ATEM Camera Converter connects to both HDMI and SDI video cameras! Video and audio are embedded into the optical fiber output, and microphone inputs are included for the ultimate in audio flexibility. That’s perfect when you need higher quality or wireless microphones on your cameras!

 

Perfect For All Types Of Events!

ATEM Camera Converter uses optical fiber for its connection, so you get long distances combined with full uncompressed HD video quality. This lets you move your cameras farther away from your switcher and closer to the action! Imagine placing a camera at the end of drag racing strip, at the starting gate of a horse race, or even at the far end of a golf course! Even low cost consumer HD cameras look amazing when used with ATEM Camera Converter! ATEM Camera Converter is perfect for concerts, sporting events or even lecture theaters, houses of worship, surveillance, or any remote camera location!

 

Ultra Tough Design

ATEM Camera Converter is designed tough enough for the rigors of life on the road! For incredible strength, ATEM Camera Converter is machined from a solid billet of aircraft-grade aluminum with recessed connectors and a button control panel. This results in an incredibly strong design that can handle bumps and knocks without breaking. ATEM Camera Converter includes a side mounted clip, so you can hang it from your belt for maxiumum portability, then simply plug in your headset, camera and optical link! The built in button pad gives you control over power, microphone level, talkback and video, as well as battery indicators. You even get a USB port for software updates!

 

Belt Clip or Camera Mount

When you need to move around, ATEM Camera Converter is perfect because it moves with you! With an integrated belt clip, you can simply snap it onto your belt, connect the cables, and move around with ease. If you’re using a tripod, it’s easy to strap ATEM Camera Converter onto the tripod beside your camera. When your camera is located in remote locations without power, the built in battery will keep you going for hours! Or, when power is available, plug in the power and use the internal battery as a built in UPS!

 

Built In Tally

Now you can clearly see when your cameras are “on air”! ATEM Camera Converter uses an open standard tally packet in the SDI output on any ATEM switcher to illuminate 2 built in tally LEDs! All you need to do is connect the ATEM switcher’s program output to the ATEM Camera Converter via the return optical fiber feed! Then simply select the camera number via USB software or using the camera number button on the keypad. If you have external monitoring plugged into the HDMI or SDI outputs, you can even display a red tally border on your monitor!

 

Battery or AC Powered

ATEM Camera Converter includes a standard 12 volt input that supports operation up to 30 volt DC. That let’s you use a wide range of power sources or even a car battery! You get a built in battery that lasts for hours and is recharged when plugged into a power supply. The 12V power connection uses a standard connector, so if you lose your power supply you can simply purchase one from any electrical retailer. If your power connection ever fails during a live event, the internal battery is automaically used to keep the ATEM Camera Converter operating! It’s just like a built in UPS!

 

Designed for Live Production

Now you can eliminate multiple boxes hanging off your camera that limit your mobility, because ATEM Camera Converter includes everything you need for operating a camera in a live production. You get a simple solution that’s really 4 converters in one! The built in keyboard is located on the top, so it’s easy to adjust. ATEM Camera Converter even adjusts the microphone audio level smoothly, so when adjusted on air you won’t notice the level change! ATEM Camera Converter is fully bi-directional, so you can connect both your camera and a return program feed to the switcher at the same time!

 

Broadcast Quality

ATEM Camera Converter might be affordable, but it’s got full broadcast quality with 10-bit video data paths, HD-SDI video technology and support for optical fiber SDI with a high quality laser driver for long distance connections. You get a solid design that looks great, but protects the connectors and keyboard from damage during live production use. Only ATEM Camera Converter gives you the best video technology available, so you get incredible quality HD video to your switcher for a true broadcast production standard.

 

 

Connections
SDI Video Input 1 x 10 bit SD/HD switchable
SDI Video Output 1 x 10 bit SD/HD switchable
HDMI Video Input 1 x HDMI 1.3 type A connector
HDMI Video Output 1 x HDMI 1.3 type A connector
Optical Fiber Video Input 1 x 10 bit SD/HD switchable via LC connector
Optical Fiber Video Output 1 x 10 bit SD/HD switchable via LC connector
Analog Audio 2 x balanced 1/4" TRS connectors (stereo), line or microphone level in. When connected, replaces audio from SDI In or HDMI In. 1 x 3.5mm stereo connector for talkback microphone. 1 x 3.5mm stereo connector for stereo headphones (compatible with iPhone compatible headsets).
Computer Interface 1 x USB 2.0 high speed interface for configuration and firmware updates

 

Standards
SDI Compliance SMPTE 259M, SMPTE 292M
Video Sampling 4:2:2
Audio Sampling Television standard sample rate of 48Khz, 24 bit A/D conversion
Color Precision 10 bit
Color Space 4:2:2 YUV
Multiple Rate support SDI and HDMI switches between 270Mb/s SD-SDI and 1.5Gb/s HD-SDI

 

Extras
Software Included Converter Utility
Firmware Upgrade Firmware built into software driver. Loaded at system startup or via updater software
Power Supply 12V power supply included with international socket adaptors for all countries
Operating System Compatibility Microsoft Windows XP, Windows Vista. Windows 7 and Apple Mac OS X
Product Warranty 12 months Limited Manufacturer's Warranty
Additional

Additional Information

SKU BMD-SWRCONV
Manufacturer Blackmagic Design
Weight 3.0000
UPC Code 9 338716 001310
Videos
Reviews
  1. Be the first to review this product

Add a review

Join our Newsletter for Special Promos
DON'T MISS OUT!
Want to be the first to know about price drops, special promotions, updates and much more! Sign up for our newsletter so you’re always in the know!